ALUMINUM TIG Practice KIT-3 "BOX IT UP!"

$12.86

This kit was designed to hit multiple aspects of Metal Fabrication and TIG welding. Work on your attention to detail, fit up, and material prep. Let’s face it, all of these factors set the stage for a strong, uniformed stack of shiny DIMES!

This kit was designed to hit multiple aspects of Metal Fabrication and TIG welding. Work on your attention to detail, fit up, and material prep. Let’s face it, all of these factors set the stage for a strong, uniformed stack of shiny DIMES!

 

Required Filler Rod- 3/32” 4043

Material-.125” Thick 5052 H-32 Aluminum Sheet Metal

Weld Joints- Open corner, Fillet

PLEASE NOTE- A HEAT-SINK OF A MINIMUN THICKNES OF .25” (6MM) MUST BE USED TO KEEP THE BASE FLANGE FROM WARPING (if you don’t have one, clamp to metal tabletop)

EXAMPLE- .25” 6MM ALUM BAR STOCK, METAL TABLETOP

Extra Information: TO AVOID WARPING Allow for some cooling time between each weld joint, this is a standard practice when working with aluminum.

 
 

★★★★★

 

“Super Fun practice kits. came ready to weld. snapped right together, only thing I did was wiped them down with acetone and welded”

@RDA_FABRICATION